Gas alarms are generally judged by detecting the concentration of leaked carbon monoxide gas; gas alarms are generally judged by detecting the concentration of leaked combustible gases such as alkanes, olefins, and aromatics. (lighters, electrical switches, static electricity, high-frequency signals... read more
Once the fixed installation of the gas alarm is in place, its position is not easy to change. The following points should be considered in specific applications. (1) Find out the possible leakage points of the device to be monitored, analyze their leakage pressure, direction and other factors, and d... read more
Precautions for the installation of gas alarms (1) The alarm probe is mainly the detection element that contacts the combustion gas sensor. It is composed of a platinum wire coil covered with alumina and a binder to form a spherical shape, and its outer surface is attached with rare metals such as p... read more
Quickly move the patient to a place with fresh air, rest in bed, keep warm, and keep the airway open. First, correct hypoxia quickly correct the hypoxia state. Inhalation of oxygen containing 5% CO2 can accelerate the dissociation of COHb and increase the discharge of CO. When inhaling fresh air, it... read more
Installation Specifications 1. When the detection (detection) point is located on the windward side of the minimum frequency wind direction of the release source, the distance between the carbon monoxide detection probe and the release source should not be greater than 2m. 2. When the detection (det... read more