How to standardize the installation of carbon monoxide alarms and what should be avoided?

Update:25-10-2022
Summary:

Installation Specifications 1. When the detection (dete […]

Installation Specifications
1. When the detection (detection) point is located on the windward side of the minimum frequency wind direction of the release source, the distance between the carbon monoxide detection probe and the release source should not be greater than 2m.
2. When the detection (detection) point is located on the downwind side of the minimum frequency wind direction of the release source, the distance between the carbon monoxide detection probe and the release source should be less than 1m.

Classic model KD-128A Mini Smoke Alarm

The toxic gas release source is located in a closed or semi-closed workshop, and the carbon monoxide detection probe should not be more than 1m away from the release source.
avoid situations
Due to the influence of outdoor conditions, there will be excessive fuel overflow or reverse smoke exhaust in the burning appliance. Such as: wind direction or speed, or large gusts;
Long-term use of burning appliances without ventilation pipes (stove, oven, fireplace, etc.).
Changes in temperature can cause exhaust gases to accumulate near the ground.
The car is idling near the garage or home.