How to maintain the alarm? ·Use a vacuum cleaner to remove the dust on the surface of the alarm once a month. ·Do not wipe the alarm with cleaners or solvents. Chemicals can permanently damage or temporarily contaminate the sensor head. Avoid spraying air fresheners, hairspray, paint or other aeroso... read more
What carbon monoxide alarms can and can't do? Alarms are designed to sense insensate carbon monoxide from a malfunctioning water heater, gas stove, gasoline engine, or other source of carbon monoxide. The alarm can only detect carbon monoxide reaching the sensor head, carbon monoxide may appear in o... read more
Carbon monoxide alarm construction wiring? Connect the input terminal of the controller to the terminal of the detector correspondingly Refer to the wiring diagram of the controller and the detector, and connect the controller to the corresponding terminals of the detector. Carbon monoxide alarms ar... read more
How to install the alarm and test the alarm? How to install the alarm? First, select the installation location of the alarm. Next, fasten the base to the wall or ceiling with the screws from the accessories provided with the alarm, then install the battery, and then screw the alarm to the base (Note... read more
Do you know the technical parameters of carbon monoxide alarms? Working voltage: main power: 220VAC, (50-60) HZ backup power: 24VAC (optional) Working temperature: 0-40℃ Working humidity: (10-95)% RH Power consumption: ≤5W per channel Detector input: four-wire combustible/toxic detector Alarm mode: ... read more