Because carbon monoxide gas is lighter than air, it is […]
Because carbon monoxide gas is lighter than air, it is recommended to install carbon monoxide gas alarms on or near the ceiling. Do not install in a place with large air flow. At regular intervals, use a small vacuum cleaner to absorb the dust on the surface of the carbon monoxide alarm.
Install the alarm near the bedroom and living area or where you think carbon monoxide may leak. It is recommended to install it on each floor of a multi-storey building. When choosing a location, make sure that you can find it in every sleeping place. Heard the bell.
Note: If the alarm is stored or placed in a place where the temperature is lower than 4°C for more than 30 minutes, it must be placed at room temperature for at least 12 hours before it can be used. Incorrect position will affect the sensitive electronic components in the alarm. .
It is not recommended to install alarms in garages, kitchens, or furnace rooms. Installation in these locations may cause annoying alarm sounds, as well as exposure to substances that can damage or contaminate the sensor head, or may not make the alarm sound audible elsewhere in the home. In garages, car exhaust can contain some carbon monoxide. When the engine starts, the carbon monoxide concentration will be relatively high, which will cause the alarm to alarm.